I've been taking woodworking classes from a fine furniture for about 6 months total now (2 different classes, just finishing it up). There's a lot of value in having power tools, but some hand tools just do a better job in so many areas. I love mixing both, and there is something very satisfying of doing a rabbit plane or using a low angle block plane that isn't felt when sanding. Smoother surface and better cuts too if you sharpen 'em.
tharkun__|3 years ago
Something I totally forgot until your reply made me remember. Paul Sellers actually made a piece for the president of the USA. He used to live in Texas.
https://paulsellers.com/2020/11/a-white-house-design/
That's not what we're talking about here tho if you ask me ;) The point is to to do something that is not easy. Something that takes time. Skill. Mastery. And do it badly lol! I sympathize a lot with the OP here, i.e. in software, I make a boo boo and I force push a `git commit -a --amend` and (almost) nobody is gonna notice. In any case I squash it all before merging, whatever may have happened "in between" in the course of "getting there". This is quite different when physical things are concerned. It's much, much harder to hide your mistakes when woodworking. It needs more knowledge and skill to hide the mishap when cutting that dove tail :)
ltbarcly3|3 years ago
It's not even cheaper, a router and a table saw can do cuts that would take hundreds of hand tools to accomplish. You can't tell in the end how a cut was made or how a board was processed, you are going to eliminate any evidence with a scraper or by sanding!
Unless you are making very square hyper-modern furniture out of planks you need so many specialized hand tools. Even doing something as simple as jointing and planing a board requires hundreds and hundreds of dollars of hand planes, or else months of searching for them in very rough condition and then the know how to refurbish planes. A Stanley hand plane costs about $150 each if bought new, and will probably still be almost unusable without a few hours of setup. A knockoff Indian plane will cost $70, but it's quite possible that no amount of effort or setup will make it usable. You need at least 3 different hand planes to plane a rough board. An electric planer costs $300 to $500, it makes absolutely no sense to buy $500 of hand planes unless you specifically want to spend 500x the effort and time.
At that point, why do you even allow yourself a set of planes? Why not literally sand the board like they did in Mesopotamia with another board and a bucket of sand? Why allow yourself a Stanley type cast iron plane, why not limit yourself to a 1700's style wood plane and a poor iron that can barely keep an edge? Why not limit yourself to a bronze hatchet? It's beyond arbitrary to decide that there is some kind of magic in choosing the most modern thing you possibly can that isn't motorized, something that can only be manufactured using the same sorts of technology that you are avoiding by using it. They were never flattening cast iron planes by hand, they aren't rolling the steel for the plane irons by hand, and they never did. They do it with giant machines in giant mechanized factories. These planes were only ever bought because the kinds of mechanization they had available in the factory wasn't available in the locations people needed to shape wood at that time.
If you want to fetishize the process or experience the history of woodworking like a worker at Colonial Williamsburg, or you are Amish, then by all means concentrate on the tools and the process, and by all means your personal experience and the value you find is fine, but don't tell people there is something lesser about the tools they use to build the things they want to build. I promise you, all those thousands of workers who spent their days sweating over their work without air conditioning or power tools would throw those hand tools directly into the trash if they had a choice to use modern tools. Which they largely did when those more modern tools became available. I am certain they would find it funny and ridiculous, if not unbelievable, that anyone would ever decide there is something spiritual and desirable in doing the sorts of physical labor they went to great lengths to minimize and which over time wore out their bodies. It's no different than insisting on digging a ditch for fiber optic cable by hand because it requires so much more time, skill, and mastery of various kinds of shovels.