[tunap]

Klein hand tools. Full stop.

Below is my favorite. Caveat, it takes some getting accustomed to if you're used to the standard plier style(They make those, too).

edit:plier handle style, not wrench

https://www.kleintools.com/catalog/cable-tools/ratcheting-ca...

[girvo]

Can anyone recommend a good tool set for crimping DuPont/JR style connectors too? They’re such a pain to deal with in my experience, I end up just harvesting random jumper cables with the right pin count/connecter and splicing/soldering instead, because every cheap crimping tool/kit I’ve come across has crazy high failure rates

[myself248]

Molex 63811-1000, full stop. I do this professionally (automotive harness prototyping), and this is the first tool I reach for when I have open-barrel terminals to work with. If they have a wire-grip section longer than 2.5mm, this is your answer. That means Dupont, most styles from Molex, TE, Sumitomo, Yazaki, etc.

(The second is the Iwiss IWS-2820M, for open-barrels with a short wire-grip section, 2mm or below. That's basically most JST styles. The Iwiss crimper has all the same nest sizes as the Engineer PAD-11 but is much better made, smaller, and cheaper to boot.)

There are, of course, countless $300-and-up official tools for specific terminals, but as far as generics go, these two are the cream of the crop.

Beware ebay triangulation scams with the 63811-1000. It should cost $55-65, any less and you're being lured. Safest to get it from one of the vendors listed on Octopart. For the Iwiss, as much as I hate to say it, just go to Amazon.

[repiret]

I’ve got that tool and I couldn’t be happier with it. Works good, does RJ11, supports pass-through RJ45, has the color coding on it so I don’t have to look it up. Not too pricy too.

[ilyt]

* Use with Klein Tools Pass-Thru™ Connectors

* Not for use with standard (non Pass-Thru™) connectors

...what does that mean ? Standard dime-a-dozen connectors won't work ?

[tunap]

Unsure, sounds like a dark pattern or, being generous, maybe liability avoidance wordage. I have crimped >1000 non "Pass-Thru™" connectors(outdoor/shielded) with mine.

edit: expanded

[joshu]

Another vote for exactly this. It's great. Get the passthrough connectors