The caps on presta valves aren't necessary as there's no way for dirt to get into the valve stem (unlike Schrader valves which can get clogged). The caps are useful for transporting the tube though to prevent the valve from puncturing anything.
Wheel reflectors are also pretty useless so you can remove those too. Plus you save some weight.
Never understood that. More visibility = potentially slightly less likely to get hit by a distracted driver so why remove the shiny reflectors spinning on your wheels?
And what’s a 20g saving per wheel when we carry so much more extra weight on our bodies.
Weight on the outside of a wheel matters more than weight on the rest of the bike for racing types - it increases the rotational inertia of the wheel, slowing acceleration & braking on top of any actual weight increase.
Personally I just buy tyres with reflective tape on the sidewalls. These are mandatory in some EU countries & are pretty effective in my experience.
Interesting. Though I'd argue that if the valve gets dirt on it, then eventually, when you unscrew it, some of that dirt will get deeper (particularly if you're completely flat and there's no pressure to push it out), and perhaps stop if from sealing perfectly. But I try to keep gear running for a very long time; this approach might be from cyclist who replace things a lot more often?
They are pretty robust, I have been riding the same presta valves on my mountain bike for maybe 5 years which I ride a few times a week, immense amounts of dry silica, muddy dirt, rain, cold, heat.
They are serviceable too. If you find it isn't sealing you can disassemble and clean the sealing surfaces, replace the locking oring or nut etc.
Somewhere I picked up the idea to place reflective tape on the inside of the rim between the spoke holes. Not really for side visibility, but for front/rear off-angle visibility I like it. You can alternate (say every 3) to produce a flashier pattern when you're moving.
ornornor|3 years ago
Never understood that. More visibility = potentially slightly less likely to get hit by a distracted driver so why remove the shiny reflectors spinning on your wheels?
And what’s a 20g saving per wheel when we carry so much more extra weight on our bodies.
pja|3 years ago
Personally I just buy tyres with reflective tape on the sidewalls. These are mandatory in some EU countries & are pretty effective in my experience.
ruiseal|3 years ago
askvictor|3 years ago
And yes, wheel reflectors are utterly useless.
ehnto|3 years ago
They are serviceable too. If you find it isn't sealing you can disassemble and clean the sealing surfaces, replace the locking oring or nut etc.
ilikejam|3 years ago
https://reflectivesupplies.co.uk/products/salzmann-3m-scotch...
are better than plastic plate reflectors in every way.
epakai|3 years ago
dev_tty01|3 years ago