(no title)
michaeltbuss | 2 years ago
Eventually, I decided to build my own. I 3D printed a case and trigger for an air sprayer can, created some electronics with an ESP32 and RF trigger, and wrote my own "motion detection" logic - this time with an ultrasonic sensor, which works much better in the dark.
Now, the cat knows that a meow or paw will get him sprayed, and my wife and I can finally sleep!
I also built an air filtration system for my 3D printer, a level checker for my water softener, and a custom keepsake box that only opens with an RFID chip that you can read more about on my blog: https://www.mikebuss.com/blog
ajbourg|2 years ago
michaeltbuss|2 years ago
cobertos|2 years ago
But also I'm not trying to keep the cat out so there's that. I just like the door closed
zestyping|2 years ago
From one side, the cat can just push open the door. The closing force on the door comes from a small weight hanging on a string, which goes from the top corner of the door to an eye screw on the wall and down to the weight. The weight is adjusted to be just barely enough to pull the door closed, so the door is easy for the cat to push open. The cat walks through and then the door closes very gently and quietly.
From the other side, the cat can pull open the door. I stuck a little hook-handle on the bottom corner of the door, and the cat learned to paw the handle and pull the door open. Because the door closes so slowly and gently, it's easy for the cat to get through.
This lets the cat can come and curl up with me whenever he wants. It's quieter than a flappy cat door; he can come and go without bothering me or waking me up.
dangond|2 years ago
She still attacks the door loudly when playing with her toys at 5 AM if we forget to confiscate them though...
ksaj|2 years ago
One night is all it took for us to remove those bells. Never again.
squintychino|2 years ago
huhtenberg|2 years ago
Was this in March by any chance?
nydev|2 years ago
JKCalhoun|2 years ago