top | item 39967701

(no title)

cschmatzler | 1 year ago

This is not related to Boeing at all. Engine covers not being closed properly is a relatively common (still rare in the grand scheme of things) incident and happens a lot more frequently on Airbus models to the point that Airbus modified the door latch.

discuss

order

s_dev|1 year ago

This incident isn't related to Boeing .. at all ... but when Airbus do it (which you assure it happens more frequently) it's related to whom exactly, and why did Airbus fix it if it wasn't related to them (modified the door latch)?

cschmatzler|1 year ago

Whoever did not latch the door properly after doing maintenance checks. Which is either a mechanic at the airline itself or someone at a maintenance hub that is contracted by the airline. Not the job of the manufacturer whatsoever.

filleduchaos|1 year ago

Worth noting that only a few weeks ago an Airbus A330 had a very similar engine-panel-coming-off issue, which I'm 99.9% sure you hadn't heard about at all until I pointed it out to you - unlike this incident, which will have hundreds of articles and blog posts written about it.

I'd like everyone here to consider just how much they are letting [social] media do their thinking for them.

(The incident I'm referring to: https://avherald.com/h?article=5169614a&opt=0)

hgomersall|1 year ago

It's interesting in the sense that it demonstrates a shift in the Zeitgeist. It's probably true that this isn't Boeing's fault, but the media have taken to reporting every problem encountered with a Boeing plane which reinforces the narrative that Boeing make poor aircraft, which ultimately is a bigger problem for Boeing than them actually making poor aircraft.

tcldr|1 year ago

> and happens a lot more frequently on Airbus models to the point that Airbus modified the door latch.

So you’re saying Airbus resolved this issue? Why hasn’t Boeing?

cschmatzler|1 year ago

Because Boeing didn’t have the same issue Airbus did. The latches on A320 family cowlings were kinda hidden from view, which made them less likely to be seen during the pilot’s walk around before departure. The EASA (and then subsequently the FAA) issued an airworthiness directive [1] that required the visibility to be resolved. For this case, it’s simply both the mechanic forgetting to latch it properly _and_ the pilot missing that fact during the walk around. Either way, it’s not really a safety critical incident, just rather embarrassing. [1] https://www.federalregister.gov/documents/2017/06/29/2017-13...