[kokx]

The biggest piece of advice I have is to not give up too easily. The writeup makes things seem a lot easier than they actually are. While working on this project I had many moments where I almost gave up. Pushing past such roadblocks can get you to great insights.

For learning how to do such things? Well, a general computer science or electrical engineering background is a great start already. Ideally you learn a bit about embedded systems and how electricity works on circuit boards. A great resource for this is Big Clive on Youtube [1] who reverse engineers many circuits on his channel.

Tinkering around with hardware at a lower level will also reward you with a lot of knowledge. For example just working with an ESP32 and some off-the-shelf sensors will help you get a feeling for how these things work. See if you can communicate with other systems as well this way. Try to do as much as possible using jumper wires and breadboards rather than premade cables, so you get to know how it works. Also get a multimeter (one that beeps) and get comfortable using it. If you're unsure which multimeter to get, Big Clive has a pretty good video about that.

One thing I recommend getting is a logic analyzer. You don't need to go for an expensive Saleae (you can find pretty cheap clones on your regular Chinese webshops for example). Then just use it to investigate things that you already have access to. Attach it to a UART port where you know data is sent over and see if you can obtain that using the logic analyzer.

Then you can probably step over to investigating things you don't know. Just figure out with a multimeter what the voltages are and see if maybe data is sent over the line.

[1]: https://www.youtube.com/@bigclivedotcom