> The ''L'' shaped conductor covers the Ethernet and the Firewire port completely on the Macbook Pro if any type of protective cover-clamshell is installed on the 15 or 17'' designs. Reason being, the ''L'' shaped conductor hugs the body so closely it cannot establish a connection if 3/64" clearance is not provided...Anecdotal evidence supports the view that the 90º magsafe connector design that Apple has reverted to using is the safer of the two designs in terms of accidents as it reduces the chances of a 'shear pull' which made the ''L'' clip vulnerable to pull downs when the Macbook is left on slick or glass like surfaces.
How is it a rebuttal? Pogue's primary complaint was the weakness of the new magnet versus the old 90º magnet. In fact, he specifically says that the last incarnation (which was a T-shaped- just with a stronger magnet) was the ideal balance, which they've now lost. The L-clip was mentioned to illustrate the continuum toward weaker and weaker connections.
Serious question -- is it really that common for people to knock a laptop off a table with the power cord? I don't think I've ever had that issue, although I did knock a PDA off my desk once because the cord was draped over the front, and with it being a very light object (no damage, it landed on carpet). Or would this be an issue with the Macbook Air due to it's small size? (I'm used to lugging around much large laptops with high friction rubber feet, back when I carried one regularly).
And, instead of a magnetic connector, would a USB type connection function similar? I know that this type of plug stays in good enough so that it doesn't fall out, but can be pulled out without holding the laptop down.
Yes, yes, yes. My friend regularly pulls his Macbook Air off of the coach, table, desk via the L-magsafe.
I've owned two MBPs and a MBA (long stories) in the last two years. T-magsafe -> L-magsafe -> back to the new thin T-magsafe. The T-magsafe annoys me in that it's harder to use in my lap, but it's vastly superior in the reasons I like it: it keeps me from ruining my laptop and/or the female power adapter slot.
I recently acquired a Samsung Series 9 by fortune and am horrified at how the AC bit goes in the side and is already incredibly flimsy. On non-Magsafe laptops, you have the same issue, it's just that instead of disconnecting, it's ruining the internal AC adapter bit. It's annoying as all-get-out when it breaks, especially if it's out of warranty and you don't know how to use a soldering iron.
I am having the same experience with my new Macbook Air. The connector feels way stronger than on my previous machine. Then again my last mac was a 4 year old original unibody, so the magsafe connector might have weakened a bit with age.
You'd wonder if pogue (who I usually like a lot) tested multiple units or just one. For a mechanical critique, its probably worth testing multiple units. Although with apples supply chain maybe Im totally off here
This is not the first time I'm reading about the problem, and the last time, I think on reddit, the replies were mixed as well. The problem is quite shocking to me, because it's their flagship product that's totally unrepairable, so the solution will probably be to just give those affected a new device. The only reusable parts may be logic board and disk. From an environmental standpoint, and of course knowing that this is just factored into the rather high price, this makes me angry.
Yep. To add to the anecdata, my dog managed to yank my laptop off of my desk quite easily, not a month after I bought it. Everything was fine --- OK, the dog was spooked --- but my laptop was still plugged in.
Personally I hate Magsafe in all its incarnations, it's always been too weak. Many times I thought I had been powering my laptop for a few hours but I had accidentally unplugged it and the battery was dead. At one point I had a laptop that had some kind of battery problems and I figured I could just use it as a desktop machine and leave it plugged in all the time. But Magsafe would just randomly detach when I moved the machine and it would immediately power down. I really don't understand the giant benefit that people see, I've never had the theoretical someone-tripping-on-the-cord-crashing-the-whole-laptop-to-the-floor problem actually happen on non-Magsafe machines.
Magsafe is the thing I hate the most in a MacBook. Maybe this is a third world problem, but this connecter is a dust magnet, and it routinely attracts so much dirt that I have to clean it up before the circuit is established. I so much prefer the PC connectors.
The people I know who love it the most have pets and/or children. I do not, but I like the ease of connecting and disconnecting it and when I visit my family who do have pets and children I also appreciate the MagSafe connector.
Exact same problem here. Battery dead (the good old swollen battery bug) and x times a day: oops black screen, Magsafe came out again. In the end I made an aluminium tetris-shaped piecs and glued it to the side of the laptop, covering the Magsafe at one end so it would never ever come out again.
> At one point I had a laptop that had some kind of battery problems and I figured I could just use it as a desktop machine and leave it plugged in all the time. But Magsafe would just randomly detach when I moved the machine and it would immediately power down.
Friend of mine had the same thing. Duct-tape to the rescue :)
David Pogue can speak for himself. I find the new magsafe to be a lot better than the old, if only because the sideways design sucked (it's harder to rotate into place when plugging in, harder to take out, and places extra strain on the connection between the wire and the plug).
They probably weakened the magnet to make it detach more easily to prevent the point where the plug connects to the wire from weakening over time, which is a battle that they (and other laptop producers) have now been fighting for many years. They've had multiple class action lawsuits about this same issue, and multiple recalls, and they still haven't been able to get it right. I personally owned multiple models that ended up producing sparks because the wires inside had gotten so badly frayed.
I reckon it's a genuinely tough engineering problem, since besides unintentional yanks, a laptop power cord gets plugged in and unplugged and hauled around in bags. But it's pretty surprising that they haven't been able to make this enough of a priority to solve it, given how much they charge for those adapters and how much they must have lost on recalls and lawsuits.
But honestly, the solution is simple enough: make the side that gets easily damaged replaceable, and let customers have free replacements every 6 months (and build that trivial cost into the original price of the adapter).
Had an L connector - I can either cover my ports or have it dangle towards the back. Towards the back, it picked up a lot of heat from the heat vents, because they run a lot because I use the laptop for heavy duty computing quite often.
I got some crap about "potential abuse - we'll switch it this time, but they're not meant to withstand abuse" (or something like that). This is normal every day use for 1 year. Old T style - have had multiple of them - never had this problem.
I haven't used MagSafe2 yet but MagSafe1 on my 2011 Macbook Air 11" is too strong. When you pull from an angle it just slides the laptop with it. I would guess that's what Apple is trying to fix with MagSafe2. It may not be much of an issue for the heavier laptops but going forward it's likely laptops are going to continue getting lighter -- not heavier. I think the benefits outweigh the drawbacks here.
I assume that the lightness of the connection has to do with the fact that the 'perfect balance' Pogue describes depends on the weight of the computer to counterbalance the break-away point of the magnet. New new 11-inch Air's are so insanely light that the old magnet could drag them all over the room (almost hang from it), thus defeating the break-away purpose.
A near feather-like connection seems required to balance such a light computer.
I'm sorry, but I'm confused. Is the new MagSafe connector exactly the same as the connector two generations back? I have a white plastic MacBook and the connector looks like the first photo.
I just had the same question. I am sitting here working on a late 2008 MacBook Pro and the magsafe connector looks exactly like the 'new' magsafe connector pictured in the article.
I've been using the 2012 MBA near daily since it came out. I have definitely noticed that the magsafe feels significantly weaker than it should, but I think it's simply a matter of Apple not cranking up the magnetism.
There is nothing inherently wrong with the T design (at least, in that it would outweigh the pros vs. the L design), and as others have pointed out, it has a number of advantages.
Speaking from personal experience, his exasperation is very over exaggerated. Sure, it's annoying, but I would much rather have it too weak than too strong.
I haven't tried the new connector, but I worry Pogue is right.
My last MacBook Pro came with the old T connector. It was a massive improvement over standard laptop connectors, but I did run into the crossed legs problem. If I had my legs crossed and set my laptop between them, I had to angle the laptop to be parallel to my left leg; otherwise my leg would dislodge the connector.
My current MacBook Pro has the L style connector. It doesn't have the lap problem, but it bugs me that it covers some of the ports. I usually plug it in so the came comes towards me (more convenient the way I have everything positioned), but that blocks the FW800 port, so I have to swap it around if I want to plug a FW800 disk in.
I like the idea of going back to the T connector, but the idea that they weakened the magnets makes me think the cross-legged problem would be even worse.
I guess I'll find out when I replace this machine with a newer one, probably in a year or two.
I just received a new MacBook Air and my MagSafe connection is pretty much the same as the last two notebooks. It sounds to me like Pogue has a physical problem with the magnet. He should get it looked at by Apple.
I can drag the 11" Air across my desk by pulling on the power cord. It doesn't disconnect unless I pull up or down.
> It’s the worst Apple design blunder since the hockey-puck mouse.
Looking back at Apple mice and their acceleration controls, I think Steve Jobs had a blind side here. Perhaps he was more coordinated than most people, so could compensate and was unaware of the various shortcomings of Apple mice.
I had hoped that Apple had finally got it's power cable plug shit together with the L-shaped Magsafe. Before that, my wife and I have managed to kill every type Apple has produced over the past decade, but the L-shaped Magsafe has survived.
Just bought a MBA yesterday, and my relatively unbiased impression (from a non Apple product user) is that the power adaptor is awesome. In fact, I would worry if it were more securely fastened in there - I don't mind if it falls out, if it means that there will be less damage over time. I've had one too many chargers ruined on my PCs... I remember buying 5 or 6 for an old Dell I had.
"The beauty of the MagSafe connector was that Apple had found precisely the right balance between attachment and detachment. Strong enough to hold the connector in place, weak enough to detach if it gets yanked."
Just one more datapoint. I had an older MacBook with the T-Magsafe and I now have a MacBook Pro with the L-Magsafe. I love the L-Magsafe. With the T type the cable near the connector would fray every year and a half or so. I had it replaced once for free. The second time I had to buy a replacement. Never had a problem with the L type. For me the return to the T type is a regression but I read in this thread that people had fraying problems with the L type. Is it a huge technical challenge to make a laptop charger that will withstand normal wear and tear for at least 3 years?
Is it just me or everyday is there a new story about Apple failing in some way? Whether it be a Microsoft-esque advertisement, patent lawsuits with Samsung, failure of a newly designed Apple power connector. I'm not an analyst so what I say should be taken with a grain of salt, but something is changing over at Apple. I honestly believe whatever magic Steve left at the place is now depleted, what we are seeing are ideas, products and ideals of a post-Steve Jobs Apple and by the looks of it, it is not doing so well.
This is only perception and not reality. If Steve was still alive this post would have still come out and the T shaped adapter would still be used on new Mac laptops.
There are a few fallacies at play in your comment and you're far from the only one to have said similar things. First off, both the L and T shaped adapters have their pros and cons. I personally prefer the T shaped adapter. The author of this piece has taken his opinion and turned it into an indictment of Apple which I get because it is an opinion piece after all but as readers we should be able to see that this isn't true for everyone. The reality is that both have their pros and cons and Apple chose T shaped adapters. For as many people out there that complain there are just as many who prefer it (myself included). The product pipeline isn't going to go downhill for years. It's well known that Jobs left the company with several years worth of products that'll be rolled out. What there is to worry about is when that pipeline ends.
The last thing that people forget is that Apple has always made mistakes. Even while Jobs was at the company. For as many hits as they have they have a ton of misses. Overall they do a great job and the ratio of hits to missed hasn't swung in favor of misses at all yet. It's just that now that Jobs is gone people understandably wonder if "this is it" for Apple whenever they miss. Considering that it hasn't even been a year since Jobs passed and how strong an influence he had at Apple it's only natural for people to take criticism that would have happened with or without Jobs and frame it in the context of Apple going downhill since Jobs died.
Apple is as strong as ever. They make amazing products as usual. They fuck up sometimes... Also as usual.
I observed this very thing with Facebook too. (Facebook Ads are clicked by bots.. Facebook has 80 million fake users..) HN front page seems to contain at least one of these stories at any given time.
I always felt that the L-connector was way to strong. There are plenty of times where it should have disconnected, but it didn't. It feels like it's only safe for really sharp tugs.
Personally I found the "L" shaped connector to be far worse since it blocks ports and encourages one to bend the cable when inserting and removing, easily leading to a frayed cable.
[+] [-] danso|13 years ago|reply
> The ''L'' shaped conductor covers the Ethernet and the Firewire port completely on the Macbook Pro if any type of protective cover-clamshell is installed on the 15 or 17'' designs. Reason being, the ''L'' shaped conductor hugs the body so closely it cannot establish a connection if 3/64" clearance is not provided...Anecdotal evidence supports the view that the 90º magsafe connector design that Apple has reverted to using is the safer of the two designs in terms of accidents as it reduces the chances of a 'shear pull' which made the ''L'' clip vulnerable to pull downs when the Macbook is left on slick or glass like surfaces.
[+] [-] jwecker|13 years ago|reply
[+] [-] raverbashing|13 years ago|reply
Can't you just make the wire run to the back? (like in the 13In I'm currently using)
Or am I missing something? (Oh, ok, It's the "cover clamshell" that's the issue)
[+] [-] derekp7|13 years ago|reply
And, instead of a magnetic connector, would a USB type connection function similar? I know that this type of plug stays in good enough so that it doesn't fall out, but can be pulled out without holding the laptop down.
[+] [-] drivebyacct2|13 years ago|reply
I've owned two MBPs and a MBA (long stories) in the last two years. T-magsafe -> L-magsafe -> back to the new thin T-magsafe. The T-magsafe annoys me in that it's harder to use in my lap, but it's vastly superior in the reasons I like it: it keeps me from ruining my laptop and/or the female power adapter slot.
I recently acquired a Samsung Series 9 by fortune and am horrified at how the AC bit goes in the side and is already incredibly flimsy. On non-Magsafe laptops, you have the same issue, it's just that instead of disconnecting, it's ruining the internal AC adapter bit. It's annoying as all-get-out when it breaks, especially if it's out of warranty and you don't know how to use a soldering iron.
[+] [-] pnathan|13 years ago|reply
So in some situations it's wonderful, in others its horrible.
But it's vastly better than any PC laptop connector I've ever used.
[+] [-] vailripper|13 years ago|reply
[+] [-] whalesalad|13 years ago|reply
[+] [-] cracell|13 years ago|reply
[+] [-] maxface|13 years ago|reply
[+] [-] konstruktor|13 years ago|reply
[+] [-] wonderzombie|13 years ago|reply
[+] [-] crag|13 years ago|reply
[+] [-] Im_Mr_Manager|13 years ago|reply
I agree with that part. Doesn't take much at all if it's pulled from anything beyond straight on.
[+] [-] guelo|13 years ago|reply
[+] [-] rickmb|13 years ago|reply
As I'm typing this, I'm trying to dislodge the L-shaped plug from my 13" Macbook, and it's truly impossible to do that by accident.
On the other side of the equation, I'm far from unfamiliar with tripping on the cord, but maybe that's just my clumsiness.
[+] [-] mqzaidi|13 years ago|reply
[+] [-] amackera|13 years ago|reply
[+] [-] sjs|13 years ago|reply
[+] [-] stinos|13 years ago|reply
[+] [-] celerity|13 years ago|reply
[+] [-] tripzilch|13 years ago|reply
Friend of mine had the same thing. Duct-tape to the rescue :)
[+] [-] ak217|13 years ago|reply
[+] [-] dfc|13 years ago|reply
[+] [-] mistercow|13 years ago|reply
I reckon it's a genuinely tough engineering problem, since besides unintentional yanks, a laptop power cord gets plugged in and unplugged and hauled around in bags. But it's pretty surprising that they haven't been able to make this enough of a priority to solve it, given how much they charge for those adapters and how much they must have lost on recalls and lawsuits.
But honestly, the solution is simple enough: make the side that gets easily damaged replaceable, and let customers have free replacements every 6 months (and build that trivial cost into the original price of the adapter).
[+] [-] dfc|13 years ago|reply
[+] [-] bmr|13 years ago|reply
[+] [-] mgkimsal|13 years ago|reply
https://plus.google.com/107376902684111594494/posts
Had an L connector - I can either cover my ports or have it dangle towards the back. Towards the back, it picked up a lot of heat from the heat vents, because they run a lot because I use the laptop for heavy duty computing quite often.
I got some crap about "potential abuse - we'll switch it this time, but they're not meant to withstand abuse" (or something like that). This is normal every day use for 1 year. Old T style - have had multiple of them - never had this problem.
[+] [-] jsz0|13 years ago|reply
[+] [-] brackin|13 years ago|reply
[+] [-] tsunamifury|13 years ago|reply
A near feather-like connection seems required to balance such a light computer.
[+] [-] StavrosK|13 years ago|reply
[+] [-] msbarnett|13 years ago|reply
[+] [-] gjkood|13 years ago|reply
[+] [-] cracell|13 years ago|reply
[+] [-] aroman|13 years ago|reply
There is nothing inherently wrong with the T design (at least, in that it would outweigh the pros vs. the L design), and as others have pointed out, it has a number of advantages.
Speaking from personal experience, his exasperation is very over exaggerated. Sure, it's annoying, but I would much rather have it too weak than too strong.
[+] [-] MBCook|13 years ago|reply
My last MacBook Pro came with the old T connector. It was a massive improvement over standard laptop connectors, but I did run into the crossed legs problem. If I had my legs crossed and set my laptop between them, I had to angle the laptop to be parallel to my left leg; otherwise my leg would dislodge the connector.
My current MacBook Pro has the L style connector. It doesn't have the lap problem, but it bugs me that it covers some of the ports. I usually plug it in so the came comes towards me (more convenient the way I have everything positioned), but that blocks the FW800 port, so I have to swap it around if I want to plug a FW800 disk in.
I like the idea of going back to the T connector, but the idea that they weakened the magnets makes me think the cross-legged problem would be even worse.
I guess I'll find out when I replace this machine with a newer one, probably in a year or two.
[+] [-] thoughtsimple|13 years ago|reply
I can drag the 11" Air across my desk by pulling on the power cord. It doesn't disconnect unless I pull up or down.
[+] [-] stcredzero|13 years ago|reply
Looking back at Apple mice and their acceleration controls, I think Steve Jobs had a blind side here. Perhaps he was more coordinated than most people, so could compensate and was unaware of the various shortcomings of Apple mice.
[+] [-] rickmb|13 years ago|reply
Why on earth did they have to mess with that?
[+] [-] salman89|13 years ago|reply
"The beauty of the MagSafe connector was that Apple had found precisely the right balance between attachment and detachment. Strong enough to hold the connector in place, weak enough to detach if it gets yanked."
Pretty subjective I think.
[+] [-] cefstat|13 years ago|reply
[+] [-] DigitalSea|13 years ago|reply
My next question is: what's next?
[+] [-] bpatrianakos|13 years ago|reply
There are a few fallacies at play in your comment and you're far from the only one to have said similar things. First off, both the L and T shaped adapters have their pros and cons. I personally prefer the T shaped adapter. The author of this piece has taken his opinion and turned it into an indictment of Apple which I get because it is an opinion piece after all but as readers we should be able to see that this isn't true for everyone. The reality is that both have their pros and cons and Apple chose T shaped adapters. For as many people out there that complain there are just as many who prefer it (myself included). The product pipeline isn't going to go downhill for years. It's well known that Jobs left the company with several years worth of products that'll be rolled out. What there is to worry about is when that pipeline ends.
The last thing that people forget is that Apple has always made mistakes. Even while Jobs was at the company. For as many hits as they have they have a ton of misses. Overall they do a great job and the ratio of hits to missed hasn't swung in favor of misses at all yet. It's just that now that Jobs is gone people understandably wonder if "this is it" for Apple whenever they miss. Considering that it hasn't even been a year since Jobs passed and how strong an influence he had at Apple it's only natural for people to take criticism that would have happened with or without Jobs and frame it in the context of Apple going downhill since Jobs died.
Apple is as strong as ever. They make amazing products as usual. They fuck up sometimes... Also as usual.
[+] [-] yoseph|13 years ago|reply
I don't know what will happen at Apple, but I don't like lynch mobs. Give Tim Cook a chance... These are very minor items.
[+] [-] reddit_clone|13 years ago|reply
[+] [-] jscheel|13 years ago|reply
[+] [-] jamesu|13 years ago|reply