(no title)
jdeibele | 4 months ago
At the 1914 house, I used ethernet-over-powerline adapters so I could have a second router running in access point mode. The alternative was punching holes in the outside walls since there was no way to feasibly run cabling inside lath-and-plaster walls.
I don't know how 2025 houses are built but I would be surprised if they didn't have an ethernet jack in every room to a wiring closet of some sort. Not sure about coax.
My son has ethernet in his dorm with an ethernet switch so he can connect his video game consoles and TV. I think that's pretty common.
runjake|4 months ago
Speaking from a US standpoint, it still not common in new construction for ethernet to be deployed in a house. I'm not sure why. It seems like a no-brainer.
Coax is still usually reserved to a couple jacks -- usually in the living room and master bedrooms.
sidewndr46|4 months ago
creato|4 months ago
tguvot|4 months ago
Analemma_|4 months ago
superkuh|4 months ago
ssl-3|4 months ago
Aye.
Cat5/6/whatever-ish cabling has been both the present and the future for something on the order of 25 years now. It's as much of a no-brainer to build network wiring into a home today as it once was to build telephone and TV wiring into a home. Networking should be part of all new home builds.
And yet: Here in 2025, I'm presently working on a new custom home, wherein we're installing some vaguely-elaborate audio-visual stuff. The company in charge of the LAN/WAN end of things had intended to have the ISP bring fiber WAN into a utility area of the basement (yay fiber!), and put a singular Eeros router/mesh node there, and have that be that.
The rest of the house? More mesh nodes, just wirelessly-connected to eachother. No other installed network wires at all -- in a nicely-finished and fairly opulent house that is owned by a very successful local doctor.
They didn't even understand why we were planning to cable up the televisions and other AV gear that would otherwise be scooping up finite wireless bandwidth from their fixed, hard-mounted locations.
In terms of surprise: Nothing surprises me now.
(In terms of cost: We wound up volunteering to run wiring for the mesh nodes. It will cost us ~nothing on the scale that we're operating at, and we're already installing cabling... and not doing it this way just seems so profoundly dumb.)
toast0|4 months ago
dpb001|4 months ago
For some reason the cable service entry is on the third floor in the laundry room. Ethernet and the TV signal cable runs from there to exactly one place, where the TV is expected to be mounted. Nothing in the nice office area on the other side of the wall.
My guess is that the thinking these days is that everyone's on laptops with wifi and hardwired network connections are only of interest for video streaming. Probably right for 99% of purchasers.