(no title)
kswzzl | 4 months ago
- As of Monday 8am ET, zero legitimate communication from any Jeep-related accounts on any social media platform, or any other form of acknowledgement from the company (unless I've missed something?)
- I only found out about the issue after finally searching a few Jeep groups on Facebook (of all places) to see if anyone else was experiencing the weird failure mode I was after the update.
- The only remotely-official info was from a 'JeepCares' account (which is ran by Jeep) on some random off-roading forum? We were seriously all living off of screenshots from this forum, and the advice coming from the JeepCares accounts was contradictory: they claimed that the Uconnect update was separate from the telematics update, and that there was no way to stop the telematics update if the vehicle received it. Later they gave advice to defer the Uconnect update, making it sound like they were coupled.
- Due to the lack of info from Jeep, people were coming up with all kinds of "if you reboot Uconnect while the Jeep's in ACC mode, it clears the check engine light". This probably did clear the CEL but didn't fix the fault.
- There is no way to tell if you received the bad update.
- There is no way to tell if you received the 'fix' either.
- Dealerships have literally no idea what is going on.
- You're basically at risk of your Jeep going limp (power loss, unable to safely make it to the shoulder) and being stranded on the highway, even as I write this.
jlokier|4 months ago
This seems extraordinary.
I was going to ask: Are you really saying they kill the vehicle's power system, effictively the engine, while the vehicle is being driven on the highway?
But no need to ask, the article says yes, that's what is reported:
> Instead, the failure appears to occur while driving—a far more serious problem. For some, this happened close to home and at low speed, but others claim to have experienced a powertrain failure at highway speeds.
Wow.
pinkmuffinere|4 months ago
trenchpilgrim|4 months ago
https://www.wired.com/2015/07/hackers-remotely-kill-jeep-hig...
worik|4 months ago
This has happened to me twice with a Nissan Leaf. I paid money to get a read out from the computer system, and there were no timestamps on the screens of data.
Modern cars "computers on wheels" are dreadful.
Is it possible to disconnect the power from the radios used for "over the air" nonsense? Then at least they would be stable.
araes|4 months ago
A GPS update kills your entire powertrain. Appears to also engage parking for some users, super dangerous. Catbones, "Almost died on the thruway today ... with an 18-wheeler behind me. ... Jeep died, locked its hand brake and jolted so hard my face almost ended up in the steering wheel at 70mph." [1]
[1] Wrangler 4xe forum, JeepCares and Catbones accounts: https://www.4xeforums.com/threads/wrangler-4xe-ota-update-10...
Personal bet: Jeep accidentally enabled the remote kill switch for repossessing automobiles. [2] Possibly the "impaired driver" kill switch. [3]
[2] Stateline, Late Payment Kill Switch: https://stateline.org/2018/11/27/late-payment-a-kill-switch-...
[3] Trackhawk, Federal Kill Switch Law: https://trackhawkgps.com/blog/kill-switch-law
casenmgreen|4 months ago
klooney|4 months ago
jacquesm|4 months ago
hinkley|4 months ago
The entire box it’s on isn’t powered while the plane is in motion (“wheels on ground”). It’s shut off before preflight and doesn’t turn back on until the plane is on the ground. The service my code is part of is responsible for queuing updates and downlinking telemetry. Updates are manual and obviously you can’t run them while in motion if the box they are on doesn’t even have power.
Cars probably don’t have to go this far, but there’s a continuum and they’re clearly in the wrong part.
coldpie|4 months ago
tremon|4 months ago
reaperducer|4 months ago
My anecdata is that my car won't update its software without the owner explicitly requesting it. And then, it will only do it if the car has something like 50% charge, hasn't been used for an hour, and nobody is inside.
I once tried to do the update while I was inside, and it refused.
skywhopper|4 months ago
SkiFire13|4 months ago
SigmundA|4 months ago
However in classic Jeep style they just can't get reliability down, and the PHEV part seems too complicated for them.
If it was just reliable it would still be the best selling PHEV in America, they let that go.
There is no sign of the 2026 Wrangler 4XE it might be canceled like the Gladiator version...
carlito02|4 months ago
frumplestlatz|4 months ago
The times that I have been given a jeep rental while on vacation or work trips have always left me disappointed with the vehicle.
kswzzl|4 months ago
20after4|4 months ago
hinkley|4 months ago
Under time pressure and confirmation bias they signed off on code that was giving off signs of being broken, pushed it, and now key staff are either on airplanes, out of coverage on their phones, or cannot work entirely from memory and don’t have their computers with them because vacation.
ryandrake|4 months ago
d_sem|4 months ago
I worked in an auto supplier years ago and there where several protections in place to prevent the risk of update corruption on safety related components. One of the simplest one the UDS programming session having entry protections related to vehicle speed, vehicle driving mode, etc.
kswzzl|4 months ago
zoeysmithe|4 months ago
I believe crowdstrike's update was on a Friday night as well.
Unless its a serious security bug, it can wait for not only for better QA testing but also for next Tuesday. Read-on Fridays need to be an industry-wide thing.
jms703|4 months ago
radicaldreamer|4 months ago
schaefer|4 months ago
jacquesm|4 months ago
hilbert42|4 months ago
If you knew upates were occurring why didn't you stop them by not allowing internet access and or disabling the web/net hardware?
I find it very odd, I never allow any hardware unfettered internet access let alone update its firmware. Experience has taught me that that's a recipe for trouble.