WingNews logo WingNews
top | item 46054142

Show HN: I engineered a 2mm micro-bearing D20 ring that free-spin for 20 seconds

23 points| spinity | 3 months ago

Over the past few months I’ve been experimenting with how small a functional bearing-based mechanism can get while still feeling smooth, durable, and useful. This project started from a simple question: How thin can a real, free-spinning bearing be while still handling continuous rotation?

Most “spinner rings” you see online cheat by simulating rotation — there’s no real bearing, just loose tolerance metal sliding on metal. True micro-bearing rotation needs precision, tight tolerances, and high surface finish, which is difficult when everything needs to be wearable on a finger.

So I tried to push it in the opposite direction and ended up making this:

A 2mm-thick stainless steel ring with an internal micro-bearing track and 20 steel balls that free-spin for 20+ seconds with a single flick.

Mechanical details: • CNC machined inner race with ~0.01mm tolerance • 20 micro steel balls loaded through a lateral channel • Outer ring pressed onto the bearing shell • No plastic, no bushings, no lubricant • Built to withstand everyday wearing forces (compression, torsion, micro-impacts) • PVD variant for color durability • Outer surface can be marked 1–20, turning it into a tiny randomizer

Originally the goal was purely mechanical — to see if a bearing this thin could be made. But it ended up being surprisingly functional for solo tabletop RPG use: when you need a quick random result but don’t have table space, or when dice are too loud (playing in bed, on a commute, etc.). The ring spins silently and lands pointing at a single number.

This wasn’t meant to replace dice; it just became a neat side effect of the engineering challenge.

Why I’m posting here

HN tends to appreciate: • micro-manufacturing • tolerances • machining challenges • precision mechanical design • unusual “why does this work?” projects

I’d love to hear feedback on: • improving durability • minimizing friction losses • alternative ball materials • raceway finishing • any tricks for increasing spin time without adding thickness

If anyone has experience with miniature bearings or wearable mechanical assemblies, I’d appreciate insights. Happy to answer questions about the build process, the tolerances, or the failures along the way.

14 comments

order

pillars|3 months ago

Sorry for offtopic, I want to share,

Some Machinist channels on youtube:

this old tony, Chronova engineering, cylo's garage, inheritance machining, breaking taps, blondie hacks, tarkka, dan gelbert, Jonesey Makes, Eric(with a K), Clough42, Alec steele, NBR Works, Not An engineer, Stefan Gotteswinter, oxtoolco, ROBRENZ, MrCrispin, Clickspring, Artisan Makes, MH Anything, Jellyfish machine,Maker B,

Check out this video on small rotor design , it is beautiful

https://youtu.be/CVszJMlvZcA?si=MEdoo_sHZcXezZtj

And also there is great course on precision engineering by Alex slocum:

https://youtube.com/playlist?list=PLksE8LDXGXl_MQHKr2DqhfDC6...

drivingmenuts|3 months ago

I’ll add Pask Makes to that list. Not specifically machining, but he does do some work with a mill.

Also, Uri Tuchmann, who is way more fun and much weirder than a lot of machinists.

RandomBacon|3 months ago

Looks cool. At first I thought the numbers might have been the dollar amounts from the Price Is Right prize wheel.

If you ever mass produce these and the price is right, I might buy a D20 version.

spinity|3 months ago

Lol, Thanks! This small engineering upgrade ended up delivering a surprisingly huge improvement. The mass-production version will be priced under $100 — the precision is too high for stamping, so every part has to be CNC-machined. That makes it slightly more expensive than typical spinning rings, but in terms of smoothness and spin performance, there is literally no spinning ring on the market that can compete.

tfwnopmt|3 months ago

If this is a piece of jewelery how are you managing the buildup of sweat/gunk/biojunk?

spinity|3 months ago

It’s essentially a 2mm-thick micro-bearing in the shape of a ring, so anything getting inside would be a serious issue. The good news is that after sealing, the only opening is a 0.1mm side gap between the inner and outer rings — and in normal daily wear, nothing gets through. (I’ve worn it for 3 months with no buildup.)

Extreme cases like mud or beach sand are possible. In those situations, a gentle spin under running water should clear it out.