[neonnoodle]

This was a very enjoyable read for me. I’ve never played 40K but have always been impressed with the craftsmanship and dedication of the community.

I remember a lot of the early hype around 3D printing, most of which hasn’t panned out where the consumer-hobbyist-level machines are concerned. My local game shop makes a lot of cool 3D printed stuff and sells it online or at cons, but even Etsy is now cracking down on prints of “commodity” STLs. IIRC under their new policy, you can’t sell a print you didn’t design yourself. This is ostensibly to cut down on the huge quantity of identical articulated toys.

But the bigger takeaway (i.e., the kit car Ferrari analogy), is similar to how I’ve been thinking about AI image generation lately. You can walk down the streets of New York and buy a counterfeit Birkin bag or Rolex from a street vendor. Are knockoffs “disrupting” the market? I guess, in a way. But I think they also make the authentic item _more_ valuable by being so cheap and fake by comparison. AI-generated “Ghibli” pictures are the same.

[gerdesj]

I remember when "Warty 40" was invented and largely supplanted Warhammer itself. I remember Citadel Miniatures and (A)D&D 1st editions, not to mention Traveler, Runequest, Tunnels and Trolls, Car Wars and many more. I was pretty decent at painting (quickly and accurately) and several kiddies used to pay me to get their latest regiment of space marines into action with the right colours. I went to a posh school and some of the kids had a lot more disposable income than me. I also had a lot more free time than I do now.

Nowadays I own a 3D printer (Prusa 4S+ with nobs on upgraded from a 3) and an IT company.

16 year old me would have committed ... a minor crime ... for the printer but given that IT was a Commodore 64, I'm not sure how I would have driven the thing.

However a 16 y/o me today with a 3D printer probably would be printing armies out of filament. I used to make plastic models too and saved up for several months to buy a double action air brush. My printer can churn out a small scale tank that rivals a Tamiya effort from back in the day. Some finishing is required but not much.

I might have a go at some Warhammer models and see how it goes, just for old time's sake ...

[marcus_holmes]

Pretty much the same age, generation and story. I also remember Traveller and Car Wars, and when 40K was first released as Rogue Trader (and when GW said that they were keeping plastic mini prices comparable to lead minis because the injection moulding equipment was really expensive, but once they'd paid that off they'd be reducing the price of plastic minis dramatically. hahahhahahhahhahah).

I had a go at FDM printing some minis, for old times' sake, and it didn't go well. The best resolution that I can get to is around 0.1mm, which is incredibly slow to print, and still not fine enough. The print layers are still visible, the detail is blurred. Sanding doesn't help that much; the face is still a mess. You can't paint individual eyeballs on them.

If you remember the first generation of plastic gobbos and dwarves in the Warhammer (not 40K) beginner box released back in the early 90's, where they obviously had two-part moulds and there were no underhangs anywhere on the models, then my FDM versions were more shit than those.

The author is spot-on about the hobby, and about the business model, and about 3D printing's place in it.

But have a go, it's a fun challenge for a 3D printer enthusiast :)

[ajsnigrutin]

> But I think they also make the authentic item _more_ valuable by being so cheap and fake by comparison.

Depends.

Here in the balkans, for some reason, Louis Vuitton bags (the ugly brown one with lighter/gold lettering) have become popular with 'the kids' some years ago.. those bags normally cost as much as a modern laptop, some even much more, but due to chinese manufacturers and local market sellers, you can get counterfits for 10-30eur, depending on the design. Are the materials, seams, zippers, metal parts (well.. metallic painted plastic), etc. worse? Sure. But from far away, it's hard to notice the difference.

Now, due to the huge cost difference between the original and the fake and easily obtainable fakes, most of such bags you see in the street are fakes.

Since it's hard to tell them apart, people just assume it's a fake bag, when they see someone carrying it. I personally know people who are pretty rich and buy expensive stuff "just to show it around", and they don't buy those bags anymore, because no one thinks it's an original bag. A 100k mat black mercedes? Can't fake that. 30k gold watch? Sure it can be fake, but few people wear watches nowaday, even fewer notice them, and very few people assume that the watch is fake. But a 3k louis vuitton handbag? In whatever shopping center or larger cafe/club you go with that, there will be a couple more girls with similar, fake ones.

[iLoveOncall]

> I remember a lot of the early hype around 3D printing, most of which hasn’t panned out where the consumer-hobbyist-level machines are concerned.

That is not true. I have a resin printer that is around 3 years old (Anycubic Photon Mono M5s) and it has a level of detail that simply cannot be matched by injection molded parts. I have printed some miniatures that have details much smaller than a human hair, like the needle of a syringe in 32mm scale.

Once painted, the figurines are indistinguishable from non-3D printed ones unless you pick them up (they're heavier often).

That said, the article is still right. Resin printers are a massive pain. They're highly toxic, and the time spent preparing, and then post-processing is quite high, but also stressful because of the toxicity. I use my filament printer almost every day, but my resin printer has been collecting dust because of this.

[raikouwithboobs]

Plus, one thing that the article misses, or rather, casually omits, is that some people want a customized base fig. They'll still put the time, the effort, the whole shebang. But they want to do it on something that is different on a foundational level from what's for sale on official channels.

Such as, I dunno. A proxy that looks like a...

Either way, no, I don't take Resin Printers as a market disruption either. But I have a rather more positive take on them: They probably grow the market itself. Because there are more people getting into the hobby. Well, that and stuff like 10th edition probably helps a bunch.

[throw-12-16]

Squidmar has a great video on how high res resin printer are actually too accurate for painting and can actually result in inferior models.

There is a sweet spot between FDM and 4k resin printers that is perfect for painting.

[aleph_minus_one]

> I remember a lot of the early hype around 3D printing, most of which hasn’t panned out where the consumer-hobbyist-level machines are concerned.

In my opinion people simply stopped following the big visions of that time and got satisfied with the current state of 3D printers instead of continuing to iterate on highly experimental designs that could bring the world nearer to these visions.

[samplatt]

Cory Doctorow waxed lyrical for many years about the ability to 3d-print clothes and other Maslow-hierarchy needs. Even the most experimental of designs haven't approached that yet... and I think we'd now be scared of increased PFAS levels even if we could.

[fragmede]

Do they? The high quality fake Rolex that only a watch nerd can tell apart, vs the shitty fake Lolex are different worlds. Similarly, the AI fake Ghibli of myself is just fun. Would it mean more if if flew to Japan and commissioned a painter at Ghibli-world for $3,000 to make the same picture? Sure, but I'm not going to do that.

[netsharc]

There's a part in Zen and the Art of Motorcycle Maintenance where the narrator's friend's bike needs some fixing, and the narrator said (I paraphrase) "you could use this piece of aluminum from a soda can to fix it", but the bike owner thinks that's blasphemy, the only way to fix it is with a part from the bike manufacturer...

https://www.excitant.co.uk/rip-robert-m-pirsig-why-zen-and-t...

But I suppose a Rolex has the property of "a token to remind me of my prosperity" that a Lolex doesn't...

[bdcravens]

> even Etsy is now cracking down on prints of “commodity” STLs. IIRC under their new policy, you can’t sell a print you didn’t design yourself.

Not really true. There was a lot of drama about this when it came out, but I suspect there were more videos on YouTube about the subject than there have been actual products taken down over this. You just have to disclose that you made it with design partners. (ie, an STL you didn't create)

[phantasmish]

I waited what I thought (and what was suggested by enthusiasts to be) long enough for the tech to be mature and approachable, and finally bought a highly-recommended beginner printer about three years ago.

I’ll never touch the tech again. The chemicals seem sketchy as hell (I don’t really want any hobbies that make me feel like I need a dedicated area of my house that I only enter while wearing significant PPE, and with gloves that never leave that dirty-zone) and after probably ten joyless hands-on hours burned over a couple weekends, I never got the fucking thing to print a single one of its test designs.

Seems like yet another fiddly hobby for its own sake (that might eventually yield some not-remotely-worth-the-cost fruits) rather than a useful tool. I don’t need what it offers that bad, the amount of money and time I’m going to put toward it in the rest of my life is zero. It’s probably a fine activity if the act of fiddling with 3D printers is the main draw for a person. Otherwise, no.

[Aurornis]

It sounds like you used a resin printer.

I would never recommend a resin printer to someone new to 3D printing. They’ve come a long way and are reasonably reliable now, but it’s not a good place to start.

[DannyBee]

I was never a fan of 3d printers, but now own 2 fdm printers that I'm quite happy with. One is an industrial nylon printer, one a prosumer printer (h2c) for everything else (the nylon printer is much faster than the h2c, printing cf nylon at 30 mm^3 easy. It is also accurate enough at that speed that there are no obviously visible layer lines).

I've probably owned 6 or 7 over the past 10 years, mainly to check out new technology and such.

I also own a very nice wood cnc and a very nice metal cnc, and use both a lot. Since they are 6 figure machines, they get modified instead of replaced ;).

So I have never been afraid to spend money to try things. I also have no issue modifying things (I have rebuilt entire cnc cabinets and mechanicals from scratch, rewritten the plc programs, etc). I donate the things I'm done with to friends or schools.

I say all this because I have also tried 4 resin printers over the past 10 years, and cathartically thrown every single one in a dumpster to avoid anyone else experiencing them.

While they have come a long way, selling any of them as a beginner level printer for someone new to 3d printing should be a crime. I can't think of a faster way to turn someone off from 3d printing. If you are doing product development or dentistry they can make sense. If you want "click button, wait, receive printed model" like most beginners, they make no sense because of the workflow.

Ironically, the one parson I know happy with their resin printer uses it exclusively to print Warhammer 40k minis (he uses one of my old fdm printers for other stuff).

[pyottdes]

It really depends on what your end goal & use case is. Resin printers are pretty phenomenal for any kind of product development and are very much a useful tool in the industrial design space. That said, casual hobbyists should almost always start with an FDM (filament) printer as a first printer. Sorry to hear you had such a bad experience :/

https://youtube.com/@pyottdesign

[terribleperson]

My Prusa Mk3s (kit built) from 2019 has been no-fiddle for all seven years of its life.

[ToucanLoucan]

Without details on what you were using, I can't be certain, but this absolutely is not my experience.

I got started in 2017 with an Ender 3, and extremely cheap printer with a basic set of features. I improved it by adding a bed leveling sensor and flashing new firmware, along with adding a tool steel nozzle and heater, and a 3d printed housing replacement for it's screen which included a place to mount a raspberry pi, running octoprint, to manage it remotely, and a webcam on a stick mounted to the Z rail. It worked pretty good, and building it was fun.

However in the intervening years, I also bought a Creality CR-6 Max, a much larger printer with a built-in bed leveler. It too got a pi and a webcam, but nothing beyond that, and it too worked well. However both those printers required constant maintenance, troubleshooting and overall fiddling. It remained my niche hobby.

I've since upgraded to a Bambu Lab H2D at great expense ($3,200 retail, utterly dwarfing the sub-$500 printers of before) and honestly, it's like a different tech all together. I don't even NEED a computer, really, unless I want to use one: I can find stuff on my phone, download it, and send it to the printer over their cloud service. And no troubleshooting really to speak of, I think I've had like 3 prints that did some weird shit and required a figure or two, but absolutely no comparison to the other machines. And in fact it's so bulletproof that my wife, who is utterly uninterested and frankly a bit hostile to tech, now uses it more than I do. She says it's a slightly trickier version of a Cricut, which is just WILD to me coming from my experiences with the Ender and Creality before it.

All of these are of course FDM printers. I have also played with a Photon Mono X I got from a friend who didn't want to use it with their birds in their home, and that one while requiring more fiddling and more chemicals, is also virtually bulletproof with regard to print quality, and you get better finishes with some tradeoffs (vulnerability to sunlight, figuring out curing vs. over-curing, what have you) which sounds a bit more like what you were dealing with. I could absolutely see that souring your opinion if you started there, that's not a beginner machine IMHO.

[throw-12-16]

Nobody uses Etsy for STL’s.

There are some great sites with thousands of designs for reasonable prices.