[laserDinosaur]

The Pro plan quota seems to be getting worse. I can get maybe 20-30 minutes work done before I hit my 4 hour quota. I found myself using it more just for the planning phase to get a little bit more time out of it, but yesterday I managed to ask it ONE question in plan mode (from a fresh quota window), and while it was thinking it ran out of quota. I'm assuming it probably pulled in a ton of references from my project automatically and blew out the token count. I find I get good answers from it when it does work, but it's getting very annoying to use.

(on the flip side, Codex seems like it's being SO efficient with the tokens it can be hard to understand its answers sometimes, it rarely includes files without you doing it manually, and often takes quite a few attempts to get the right answer because it's so strict what it's doing each iteration. But I never run out of quota!)

[stareatgoats]

Claude Code allegedly auto-includes the currently active file and often all visible tabs and sometimes neighboring files it thinks are 'related' - on every prompt.

The advice I got when scouring the internets was primarily to close everything except the file you’re editing and maybe one reference file (before asking Claude anything). For added effect add something like 'Only use the currently open file. Do not read or reference any other files' to the prompt.

I don't have any hard facts to back this up, but I'm sure going to try it myself tomorrow (when my weekly cap is lifted ...).

[sigseg1v]

What does "all visible tabs" mean in the context of Claude Code in a terminal window? Are you saying it's reading other terminals open on the system? Also how do you determine "currently active file"? It just greps files as needed.

[idonotknowwhy]

Yes, it does exactly that. It also sends other prompts like generating 3 options to choose from, prefilling a reply like 'compile the code', etc. (I can confirm this because I connect CC to llama.cpp and use it with GLM-4.7. I see all these requests/prompts in the llama-server verbose log.)

You can stop most of this with

export DISABLE_NON_ESSENTIAL_MODEL_CALLS=1

And might as well disable telemetry, etc: export CLAUDE_CODE_DISABLE_NONESSENTIAL_TRAFFIC=1

I also noticed every time you start CC, it sends off > 10k tokens preparing the different agents. So try not to close / re-open it too often.

source: https://code.claude.com/docs/en/settings

[aanet]

^ THIS

I've run out of quota on my Pro plan so many times in the past 2-3 weeks. This seems to be a recent occurrence. And I'm not even that active. Just one project, execute in Plan > Develop > Test mode, just one terminal. That's it. I keep getting a quota reset every few hours.

What's happening @Anthropic ?? Anybody here who can answer??

[alexk6]

[BUG] Instantly hitting usage limits with Max subscription: https://github.com/anthropics/claude-code/issues/16157

It's the most commented issue on their GitHub and it's basically ignored by Anthropic. Title mentions Max, but commenters report it for other plans too.

[vbezhenar]

This whole API vs plan looks weird to me. Why not force everyone to use API? You pay for what you use, it's very simple. API should be the most honest way to monetize, right?

This fixed subscription plan with some hardly specified quotas looks like they want to extract extra money from these users who pay $200 and don't use that value, at the same time preventing other users from going over $200. Like I understand that it might work at scale, but just feels a bit not fair to everyone?

[MillionOClock]

I very recently (~ 1 week ago) subscribed to the Pro plan and was indeed surprised by how fast I reached my quota compared to say Codex with similar subscription tier. The UX is generally really cool with Claude Code, which left me with a bit of a bittersweet feeling of not even being able to truly explore all the possibilities since after just making basic planning and code changes I am already out of quota for experimenting with various ways of using subagents, testing background stuff etc.

[heavyset_go]

Like a good dealer, they gave you a cheap/free hit and now you want more. This time you're gonna have to pay.

[bmurphy1976]

I've been hitting the limit a lot lately as well. The worst part is I try to compact things and check my limits using the / commands and can't make heads or tails how much I actually have left. It's not clear at all.

I've been using CC until I run out of credits and then switch to Cursor (my employer pays for both). I prefer Claude but I never hit any limits in Cursor.

[fragmede]

How quickly do you also hit compaction when running? Also, if you open a new CC instance and run /context, what does it show for tools/memories/skills %age? And that's before we look at what you're actually doing. CC will add context to each prompt it thinks is necessary. So if you've got a few number of large files, (vs a large number of smaller files), at some level that'll contribute to the problem as well.

Quota's basically a count of tokens, so if a new CC session starts with that relatively full, that could explain what's going on. Also, what language is this project in? If it's something noisy that uses up many tokens fast, even if you're using agents to preserve the context window in the main CC, those tokens still count against your quota so you'd still be hitting it awkwardly fast.

[genewitch]

sounds like the "thinking tokens" are a mechanism to extract more money from users?

[behnamoh]

> I've run out of quota on my Pro plan so many times in the past 2-3 weeks.

Waiting for Anthropic to somehow blame this on users again. "We investigated, turns out the reason was users used it too much".

[ChicagoDave]

I never run out of this mysterious quota thing. I close Claude Code at 10% context and restart.

I work for hours and it never says anything. No clue why you’re hitting this.

$230 pro max.

[fluidcruft]

Does closing claude code do something that running /clear does not?

[yjtpesesu2]

Any clue why you might be a favored/favoured high value user?

[croes]

Pro is 20x less than Max

[nwatson]

Self-hosted might be the way to go soon. I'm getting 2x Olares One boxes, each with an RTX 5090 GPU (NVIDIA 24GB VRAM), and a built-in ecosystem of AI apps, many of which should be useful, and Kubernetes + Docker will let me deploy whatever else I want. Presumably I will manage to host a good coding model and use Claude Code as the framework (or some other). There will be many good options out there soon.

[behnamoh]

> Self-hosted might be the way to go soon.

As someone with 2x RTX Pro 6000 and a 512GB M3 Ultra, I have yet to find these machines usable for "agentic" tasks. Sure, they can be great chat bots, but agentic work involves huge context sent to the system. That already rules out the Mac Studio because it lacks tensor cores and it's painfully slow to process even relatively large CLAUDE.md files, let alone a big project.

The RTX setup is much faster but can only support models ≤192GB, which severely limits its capabilities as you're limited to low Q GLM 4.7, GLM 4.7 Flash/Air/ GPT OSS 120b, etc.

[NitpickLawyer]

I've been using local LLMs since before chatgpt launched (gpt-j, gpt-neox for those that remember), and have tried all the promising models as they launch. While things are improving faster than I thought ~3 years ago, we're still not there in terms of 1-1 comparison with the SotA models. For "consumer" local at least.

The best you can get today with consumer hardware is something like devstral2-small(24B) or qwen-coder30b(underwhelming) or glm-4.7-flash (promising but buggy atm). And you'll still need beefy workstations ~5-10k.

If you want open-SotA you have to get hardware worth 80-100k to run the big boys (dsv3.2, glm4.7, minimax2.1, devstral2-123b, etc). It's ok for small office setups, but out of range for most local deployments (esp considering that the workstations need lots of power if you go 8x GPUs, even with something like 8x 6000pro @ 300w).

[zen4ttitude]

I think this is the future as well, running locally, controlling the entire pipeline. I built acf on github using Claude among others. You essentially configure everything as you want, models, profiles, agents and RAG. It's free. I also built a marketplace to sell or give away to the community these pipeline enhancements. It's a project I wanted to do for a while and Claude was nice to me allowing it to happen. It's a work in progress but you have 100% control, locally. There is also a website for those not as technical where you can buy credits or plugin Claude or OpenAI APIs. Read the manifesto. I need help now and contributors.

[thunfischtoast]

I've used the Anthropic models mostly through Openrouter using aider. With so much buzz around Claude Code I wantes to try it out and thought that a subscription might be more cost efficient for me. I was kinda disappointed by how quickly I hit the quota limit. Claude Code gives me a lot more freedom than what aider can do, on the other side I have the feeling that pure coding tasks work better through aider or Roo Code. The API version is also much much faster that the subscription one.

[aja12]

Being in the same boat as you I switched to OpenCode with z.ai GLM 4.7 Pro plan and it's quite ok. Not as smart as Opus but smart enough for my needs, and the pricing is unbeatable

[rasmus1610]

Very happy to see that I am not the only one. My pro subscription lasts maybe 30 minutes for the 5 hour limit. It is completely unusable and that's why I actually switched to OpenCode + GLM 4.7 for my personal projects and. It's not as clever as Opus 4.5 but it often gets the job done anyway