The MakerBot's problem is simply that low-end extruder-type 3D printers don't work very well.[1] They're easy to make, so there are lots of variations on that theme. TechShop has, over time, had one or two of all the major flavors. They're useful for making relatively thin parts, but anything taller than 3cm or so usually founders on the basic fact that ABS has too big of a coefficient of expansion to build something tall without delaminating due to thermal stress.
The frontier in 3D printing seems to be to get the cost down on the high-end processes, which are now very good. The Form1, the low-end stereolithography printer, is a nice little machine, and it's real. TechShop SF and Hacker Dojo in Mountain View both have one. Form1 charges $145/liter for the working fluid, so that's how they make their money.
Eventually, somebody is going to get low-cost laser sintering of metal powder figured out. But not quite yet. The Aurora Labs 3D metal printer turned out to cost about 10x the original $4000 price. MatterFab hasn't shipped their device. There's a low-end electroplating printer, but that's inherently a very slow process.
I'm not sure that's their main problem. Other companies are alive and well selling similar printers to customers that know what they buy.
I think MakerBots biggest problem is that they've marketed (and with Gen5, designed) their products as being "consumer ready" when they're far from it.
With the huge brand name of MakerBot, I can't help feel that this is going to create a setback for the 3D printer market. It's just sad.
> The frontier in 3D printing seems to be to get the cost down on the high-end processes, which are now very good. The Form1, the low-end stereolithography printer, is a nice little machine, and it's real. TechShop SF and Hacker Dojo in Mountain View both have one. Form1 charges $145/liter for the working fluid, so that's how they make their money.
$3000 for a proven technology. Home-made CNC mills have always come in between $1000 to $3000, and now professional turnkey solutions are available in that price range.
I do realize CNC machines are the "opposite" of a 3D Printer. But if a CNC machine can get a software stack as easy to use as the 3d printers, then I think they'd get a lot more use.
They have problems at two levels. At one level is that their management isn't very nice and thus the internal culture appears to be very strained. At least if you read the comments from about 50-60 former and current employees on one of those "employee satisfaction" websites whose name escapes me at the moment (Glass Door?).
They went from a very open company embracing open source and the Maker culture, to a closed company that was about pushing products that were not mature in order to meet revenue demands from their new owners. Their new owners being one of the big names in an industry that has been defined by patenting the fuck out of everything and then holding progress back for dear life. (High end 3D printers are the ultimate razor-blade business model -- with the slight difference that the razor handle isn't exactly cheap. Ask someone who owns a high end printer and they'll be able to tell you how insanely expensive they are to run).
At the more obvious level, Makerbot are in trouble because they have made a defective product. It would have been okay if the product was still "open" so users could service the parts or upgrade components, but now you can't.
In particular they have made an extruder that fails on almost every level. From the badly designed hotend that has an entirely wrong temperature gradient, to the non existing adjustment of idler wheel pressure, the unnecessary custom designed hobbed wheel, the lack of gearing on the stepper, meaning that it is too weak to do its job (look for "tick of death"), the fact that you can't open the extruder without voiding the warranty and risk breaking off the tabs to hold it together and the various Z-axis calibration problems which means that automatic offset measurement both results in the wrong distance AND it takes more time on EVERY print than it takes to calibrate the Z-offset on a manual printer ONCE.
The upshot of this is very frequent printing malfunctions, an extruder that is only guaranteed for 200 hours of operation before it has to be replaced, and if the extruder clogs, you have to send it in to have it cleared. (Extruder clogs can happen at any time. I've had extruders clog after just 2 hours). In Norway a new extruder costs about 4000,- NOK ($510)the last time I checked. For moderate use while prototyping you need between one and two new extruders per month, plus you need a population of extruders big enough to guarantee that you have extruders on hand when sending back extruders for repair.
You can calculate how many times over a year you pay the price of a new printer in spare parts alone. The Makerbot is a fucking expensive machine to run. (Yet not as expensive as the big high end printers from 3DS, Stratasys etc)
(Of course, in real life, time is worth more, so you fix the clogged extruders yourself and void the warranty).
So no, it is not about high end versus low end processes. Most people who are in the market for FFF (FDM) printers know precisely what the process can deliver. And there are printers that reliably deliver the expected results. Makerbot's fifth generation printers are not among them.
While the Osborne effect might have been a contributor to their earlier troubles, it isn't what is ailing them now. In fact, you would have to ignore half a dozen bigger issues before you would desperately reach for the Osborne effect.
(I have a Makerbot fifth gen at work and we've gone through three extruders before just giving up. The thing doesn't work. I occasionally update the firmware and the desktop software to see if things have improved, but there really isn't that much you can do when the key problem is horrendeously inept mechanical design.
I also have a Makergear M2 at home which (in Norway) costs about half of what the Makerbot costs, and which has worked impeccably for months now. After 4 monts the extruder mount started breaking apart. So I quickly printed a new one (before it broke completely) and replaced it. It cost me about $2 and it took 90 minutes from I discovered the cracks until I had the new part mounted. Apart from that I have had no problems and have had to replace no other parts)
i am always amazed at how 3d printer articles brought to the forefront of this aggregator rarely, if ever, talk about the peachy printer
in considering lowering costs i suppose the question is who is assessing these costs: an individual, or a company
form1 is interesting but at 3.3k that is quite expensive for an individual
there is an effort for a 100$ stereolithographic printer called the peachy printer
comparing specs:
pP(i) form1(ii)
resolution .2mm 20-200microns(.02-.2mm)
build vol ?inf?* 125×125×165
software open closed
price printer 100$** 3.3k$
price resin 60$ 150$
* peachy's design is formless, seemingly only limited by the tank volume and struts
** 100$ self assembly, 400$ fully built
when the peachy is finalised and in the hands of users i think this build volume aspect will be a source of very interesting experimentation and debate
peachy was impressive when it started its effort and has steadily improved but the really impressive element of the campaign for me is the transparency of development(iii), and the ethics of its staff(iv)
I wonder why we haven't seen a hybrid of a 3d printer plus cnc machine? That way you could have a really inexpensive 3d process that is low resolution, then have a cnc cutter that finishes it up. (A cnc machine by itself normally has as a disadvantage of a large amount of waste of input material).
The challenge of being an open source hardware manufacturer in the presence of an economy that is better suited to create hardware than you are (China in this case) is that you really have to execute well. I agree it was a huge mistake on Bre's part to leak the upcoming Rep 2. Without incoming orders you have to fund current orders and R&D out of cash on hand, and that doesn't work without a big line of credit.
But it is also really unfair to second guess someone who is riding a bucking bull in a nursery. That is what running a very successful startup can be like, lots of money coming in, decisions needing to be made with too little information, large outcome swings based on them with precious little runway to correct for errors. When you are in that space and someone reaches in and offers to lift you out, it can be hard to be rational about the choices you are making. It seemed to me that Stratasys knew exactly what they where doing, and less so for Bre and crew.
Unfortunately for Stratasys they failed to understand why Makerbot had been growing like it had, probably taking the late product launch as all the rationale they needed for a cash short company. I believe that had they understood what they had stepped in to, they would have approached it very differently and made very different choices. Not the least of which would be a mixed model of open and proprietary gizmos for their printers.
I am convinced that their lack of openness lead directly to the C.F. that is their "SmartStruder" which now has people calling for class action lawsuits.
A company with the Goodwill of a Printrbot and the resources of a Stratasys would have dominated the 3D market completely. Instead small printer companies are flourishing and kickstarters for new printers regularly cross $1M in pledges (and that is for printers no one has any right to believe can even be built!)
I found it hugely ironic that Bre is on the cover of this month's Popular Science [1]
The trouble with MakerBot isn't just that they're a US open source hardware manufacturer in a world where China is better economically suited to making hardware, it's that their business model is based around taking other people's openly-available R&D and designs and turning them into products. Which means that they have nothing to compete on other than patriotism when Chinese companies do the same for less.
For example, I believe MakerBot changed their extruder design for one that was suspciously similar to something one of the Chinese manufacturers came up with. Then their parent company Stratasys sued that company to stop them selling their printers, claiming the extruder infringed a patent of theirs via some, errm, creative interpretation of the patent claims. Buying MakerBot printers doesn't even help fund the companies that do the original R&D - it helps fund someone that's trying to sue them out of business.
Their printers are not cheap, not reliable and not even all that original, so why would you buy them?
> I am convinced that their lack of openness lead directly to the C.F. that is their "SmartStruder" which now has people calling for class action lawsuits.
What is the story of this? (I tried searching for "SmartStruder class action" and all I found was this particular comment.)
I'm pretty tech savvy, and I honestly can't find a reason, other than tinkering, to buy a 3d printer. In almost every case, the thing the printer would be making for me, at huge effort in time and materials, is solvable with a cheap, sub-$1 Chinese made part or some other more convenient alternative.
The lack of real use-case is what's killing consumer-level 3d printers. Most people just don't need to run off a couple copies of a 3d trinket or toy with enough frequency to make it worth it. And the subset of those people with useful 3d-modeling skills is some tiny fraction of that number.
Whenever I see somebody using a 3d printer at the consumer level for something useful, it always seems to have just been for a one-off Arduino case or something like that. That's really just not incentive for me to spend the time and money to get setup with 3d printing, when I can just buy a case off of Amazon or whatever and be done with it.
The cost of the parts is the cost of your time + materials + setup costs (the printer). Is an Arduino case really worth $1400-$6500? That price only comes down if I print off more stuff I suppose, but at what point do the trinkets and dodads I'm printing off start to make economic and time sense? That's pretty far down the production chain, and I simply don't have that much stuff to print.
I am the founder of OpenPnP, an Open Source SMT pick and place platform. I eschewed 3D printing for my design work for several years thinking that it was not accurate enough, not strong enough, etc. Having experience with CNC mills I kept comparing 3D printed parts to ones cut accurately from aluminum and found them lacking.
What I recently came to realize is that the power of 3D printing is in it's instant turnaround and the ability to quickly iterate. Now, I design my parts for 3D printing. They look and function differently than they would if I had cut them from aluminum and I have to take the limitations of 3D printing into account, but they work. And most importantly, I can test a new design simply by hitting "Print" and waiting an hour or two.
I agree that much of the consumer market is dominated by people who buy a 3D printer and then use it to print trinkets until they get bored, but there are also a lot of people out there who are engineering new devices and machines using the ability to quickly test new designs on a 3D printer.
I'm in mechanical engineering and love tinkering with stuff, and I also can't really find an excuse to get a 3D printer. In the research lab I used to work in, we had both a printer and trotec laser cutter (for acrylic and similar), and the cutter was used multiple times every single day while the printer was fired up once a month or so. Note that we also had two CNC milling machines, a lathe and a full complement of power tools, which likely contributed to the printer seeing very little use.
Also, your post reminds of a recent blog post by a friend of mind who is cofounder of a makerspace in the college town we were in. Loosely translated, he deplored how the maker culture has shifted from a utopia where everyone could learn to make their own durable and useful objects instead of buying into mass-production, planned obsolescence and consumerism, to a bunch of people manufacturing mostly useless plastic trinkets.
All in all though, when I move into a home with a garage, I'd love to get of those chinese mini-lathes which can be had for sub-1000$ :) And I wish laser cutters were less expensive (the trotec we had was bought around 40k I think, actually more than our CNCs).
If I had been born 10-15 years later I might have held that opinion too. But I was born in the early 1970s and I have seen computers, mobile phones, Internet and a few other things go from not being a clear consumer product to where the consumer sector completely dwarfs the corporate sector.
I'm not really disagreeing with you: right now it doesn't feel like 3D printers are a typical consumer item.
But experience tells me that this intuition is probably wrong.
As for "who needs it right now" I usually ask people if they own a plunge saw. Most people don't, but a lot of people do. In particular carpenters and DIY'ers. 3D printers are still unfamiliar territory for most people, but that'll change rapidly as they become better and cheaper.
In the future, as they become cheaper and better I don't see it as impossible that manufacturers of physical goods might use 3D printing to distribute spare parts and accessories for whatever they sell.
(i) an arm on my glasses broke, i went to the shop i bought the glasses from, for 400$, and their suggestion? buy a new pair and my prescription has expired since the last time so i will need to have an eye exam for another 200$
(ii) the little plastic latch on my girlfriend's bike helmet broke in half, it still latches but can pop free with enough pressure
(iii) the clip on my compass broke so now i just tape a pencil onto it
(iv) variably sized plant pots
(v) mechanism holding the wheel on our closet door broke
(vi) clip on accessories: front and rear lights, phone nav; for bike
it's little annoyances that crop up and cause me to think i wish i could just print this little solution out
i think we need the printers in homes before we start to think about what we can print with them
the biggest problem i see is print time and recyclability of old parts
it is funny thought though.. i hate personal printers, all this useless paper lying about: "print me a reciept", "print me a boarding pass", "print me a copy of the report"
To avoid the Osborne effect, they could simply have produced new versions and only open the source once released.
That's not the real problem. I guess it was a combination of chinese knockoffs and stratasys proprietary instincts.
In any case, IMHO, the layoffs are a result of losing the open community, which is now being serviced by true open-source proponents like Aleph with their excellent Lulzbot printers.
The Osborne effect whee announcing a future product before it is made way too early cancels sales of the current project.
People forget when Osborne was losing sales, the IBM PC and PC-DOS was gaining sales and CP/M systems like those made by Osborne had a lot of competition. Microsoft/IBM had a converter program that could convert CP/M-80 programs to DOS programs. http://blogs.msdn.com/b/oldnewthing/archive/2015/04/17/10608...
Also Kaypro had won over Osborne customers with their own CP/M machines that reached the market before the new Osborne models.
Commodore had the VIC-20 and later Commodore-64 that provided cheaper computers as did the 8 bit Atari line. Some people would rather buy a $399 Commodore or Atari computer and hook it up to their TV screen.
So announcing a new product too far ahead of time was only one factor in the Osborne effect.
Makerbot has Chinese competition, and they had technical issues as well. There are more factors here than just announcing a new product too far ahead of time. Instead of Osborne it is more like the Apple III http://en.wikipedia.org/wiki/Apple_III
Gee, thanks, Bre. Again, why do you think that's true?
How did you come to that conclusion?
What do you know that those of us still in the "fantasy world" don't know?
Aha, that's it!
MakerBot fell victim to the Osborne effect, where talking openly about future products hurt the sale of their current products.
Sales dropped, so they got scared and went closed.
That sounds like a way more honest and real answer than the non-existence of an open source steel bender.
Commenting on the tone alone, this strikes me as the logic of someone who has already arrived at a conclusion (the MakerBot founders are concealing the real reason behind their abandonment of open-source), and is merely searching for evidence to back up a conclusion they've already arrived at.
The author may have a dog in this fight, but it would be incorrect to claim they have a beef with MakerBot's founders, given that Zach “Hoeken” Smith, one of the founders, has been openly critical of the move to closed source, and also was forced out of the company.
Makerbot is doomed because not only will nobody in the hobbyist market buy their printers anymore, but when the people who are in the hobbyist market get asked about what printer to buy, the will recommend against makerbot (well, more specifically against Bre Pettis).
Perhaps an open source model might have mitigated the atrocious quality of the 5th generation Makerbot. I must have replaced our extruder 5 times already, and the entire machine had to also be replaced once. This is all on a maker care warranty, so no matter what they charge, there is no profit left.
If I could have replaced the extruder with an open source clone that functioned better, I would have.
This is what the business press is reporting, and it makes sense. The author of the article obviously has a grudge against MakerBot and decided to go postal against them when he read the layoff headlines without doing due diligence first. (Wait until he finds out they closed their retail stores!)
I'm curious to see how 3D Robotics handles a similar situation. Their drone platform has been open source hardware plus open source software. There are Chinese companies cloning the hardware and selling it for much cheaper than 3D Robotics sells it for.
3D Robotics just raised $50M in a series C. It will be interesting to see how their commitment to openness holds up.
I'm curious about that as well, some people have bet it's gonna be a mix of open hardware and proprietary (even if just by code) "governors", something the newest launch, the solo (http://3drobotics.com/solo/), would be well-equipped to do (I haven't done the research to confirm/deny that yet).
3D Robotics only open source the flight controller hardware and software and ground control software. delivering a safe drone platform requires a lot more hardware (the aircraft itself, camera and radio gear) and firmware (camera, gimbal, speed controller radio gear).
Agreed that it will be an interesting study. 3DR needs to cross the chasm into mass acceptance before their cost-conscious hobbyist base migrates. (Consider this in the light of Anderson's comparisons to the Apple II.) As others pointed out, MakerBot's tech couldn't make the leap, and 3D printing doesn't have a mass market on the horizon.
If 3DR drones are more expensive, it's not only because they're not made in China. Manufacturing in Mexico is cheap enough, and buys you lead time, which suits their extremely fast iteration. A good idea in this gold rush.
People will pay more for the brand, if it stands for great support and integration. China is traditionally poor at those. 3DR started with a community, and regular people diving into drones will appreciate this comfort level.
What does that say about the idea of doing open hardware in general? You do all the work, some other manufacturer in China greatly undercuts you. How is that a good idea?
What I generally do is "I've got Rev C for sale. Source and schematics for Rev A remain available on my wiki, sources and schematics for Rev B now are available on the same wiki."
I interviewed for a software job there twice. It seemed pretty dysfunctional to me. For one project, they had 20 people working on something that I thought would take 3-5 people.
This leaves out some really important background. Makerbot quietly sold out to Stratasys in 2013. When they did that they lost their soul and their independence. The first sign of that was when they went closed source alienating a huge portion of their customer base. This is just another shoe dropping now that Stratasys owns them they are moving to more tightly integrate Makerbot into the rest of the company. These layoffs are supposedly to remove duplicative positions due to the buyout. There is a good documentary on Netflix about the 3d printing revolution called "Print the Legend" It covers a lot of the history behind Makerbot including the fact that there were really 3 co-founders instead of just the one that gets regularly mentioned in news coverage.
TL;DR - If your corporation is extremely open/transparent, including R&D, you may risk losing sales from people willing to wait for a version 2.0. If so, don't close up/make opaque your business as a response, or you'll end up killing your core audience.
doomed is a strong word, and the article makes no attempt to argue that makerbot is doomed, but rather assumes it without any argument or demonstration at all.
i have no stake in it myself, but if you're gonna make a strong statement like "doomed" you should back it up. layoffs != doomed
Did no one see "Print the Legend" on Netflix. Pretty well discusses this matter in detail. It also deals with funding a new business and the various pitfalls.
I learnt _huge_ amount pretty much accidentally from that machine and the user manual that came with it. Nobody told me at 12 or 14 years old that kids weren't supposed to solder together a handful of parts to add a joystick to the parallel port and write Z80 assembler routines to speed up the inner loops of games written in basic.
The author is somehow making a connection between what "doomed" Makerbot and why they went closed source. Makerbot biggest growth year was 2013 (approximately quadrupled booking rate over the course of it), the year immediately after going closed source.
[+] [-] Animats|11 years ago|reply
The frontier in 3D printing seems to be to get the cost down on the high-end processes, which are now very good. The Form1, the low-end stereolithography printer, is a nice little machine, and it's real. TechShop SF and Hacker Dojo in Mountain View both have one. Form1 charges $145/liter for the working fluid, so that's how they make their money.
Eventually, somebody is going to get low-cost laser sintering of metal powder figured out. But not quite yet. The Aurora Labs 3D metal printer turned out to cost about 10x the original $4000 price. MatterFab hasn't shipped their device. There's a low-end electroplating printer, but that's inherently a very slow process.
[1] http://gizmodo.com/why-3d-printing-is-overhyped-i-should-kno...
[+] [-] snom320|11 years ago|reply
I think MakerBots biggest problem is that they've marketed (and with Gen5, designed) their products as being "consumer ready" when they're far from it.
With the huge brand name of MakerBot, I can't help feel that this is going to create a setback for the 3D printer market. It's just sad.
[+] [-] dragontamer|11 years ago|reply
High quality desktop CNC Mills are out.
http://carbide3d.com/
$3000 for a proven technology. Home-made CNC mills have always come in between $1000 to $3000, and now professional turnkey solutions are available in that price range.
I do realize CNC machines are the "opposite" of a 3D Printer. But if a CNC machine can get a software stack as easy to use as the 3d printers, then I think they'd get a lot more use.
[+] [-] bborud|11 years ago|reply
They have problems at two levels. At one level is that their management isn't very nice and thus the internal culture appears to be very strained. At least if you read the comments from about 50-60 former and current employees on one of those "employee satisfaction" websites whose name escapes me at the moment (Glass Door?).
They went from a very open company embracing open source and the Maker culture, to a closed company that was about pushing products that were not mature in order to meet revenue demands from their new owners. Their new owners being one of the big names in an industry that has been defined by patenting the fuck out of everything and then holding progress back for dear life. (High end 3D printers are the ultimate razor-blade business model -- with the slight difference that the razor handle isn't exactly cheap. Ask someone who owns a high end printer and they'll be able to tell you how insanely expensive they are to run).
At the more obvious level, Makerbot are in trouble because they have made a defective product. It would have been okay if the product was still "open" so users could service the parts or upgrade components, but now you can't.
In particular they have made an extruder that fails on almost every level. From the badly designed hotend that has an entirely wrong temperature gradient, to the non existing adjustment of idler wheel pressure, the unnecessary custom designed hobbed wheel, the lack of gearing on the stepper, meaning that it is too weak to do its job (look for "tick of death"), the fact that you can't open the extruder without voiding the warranty and risk breaking off the tabs to hold it together and the various Z-axis calibration problems which means that automatic offset measurement both results in the wrong distance AND it takes more time on EVERY print than it takes to calibrate the Z-offset on a manual printer ONCE.
The upshot of this is very frequent printing malfunctions, an extruder that is only guaranteed for 200 hours of operation before it has to be replaced, and if the extruder clogs, you have to send it in to have it cleared. (Extruder clogs can happen at any time. I've had extruders clog after just 2 hours). In Norway a new extruder costs about 4000,- NOK ($510)the last time I checked. For moderate use while prototyping you need between one and two new extruders per month, plus you need a population of extruders big enough to guarantee that you have extruders on hand when sending back extruders for repair.
You can calculate how many times over a year you pay the price of a new printer in spare parts alone. The Makerbot is a fucking expensive machine to run. (Yet not as expensive as the big high end printers from 3DS, Stratasys etc)
(Of course, in real life, time is worth more, so you fix the clogged extruders yourself and void the warranty).
So no, it is not about high end versus low end processes. Most people who are in the market for FFF (FDM) printers know precisely what the process can deliver. And there are printers that reliably deliver the expected results. Makerbot's fifth generation printers are not among them.
While the Osborne effect might have been a contributor to their earlier troubles, it isn't what is ailing them now. In fact, you would have to ignore half a dozen bigger issues before you would desperately reach for the Osborne effect.
(I have a Makerbot fifth gen at work and we've gone through three extruders before just giving up. The thing doesn't work. I occasionally update the firmware and the desktop software to see if things have improved, but there really isn't that much you can do when the key problem is horrendeously inept mechanical design.
I also have a Makergear M2 at home which (in Norway) costs about half of what the Makerbot costs, and which has worked impeccably for months now. After 4 monts the extruder mount started breaking apart. So I quickly printed a new one (before it broke completely) and replaced it. It cost me about $2 and it took 90 minutes from I discovered the cracks until I had the new part mounted. Apart from that I have had no problems and have had to replace no other parts)
[+] [-] justifier|11 years ago|reply
in considering lowering costs i suppose the question is who is assessing these costs: an individual, or a company
form1 is interesting but at 3.3k that is quite expensive for an individual
there is an effort for a 100$ stereolithographic printer called the peachy printer
comparing specs:
when the peachy is finalised and in the hands of users i think this build volume aspect will be a source of very interesting experimentation and debatepeachy was impressive when it started its effort and has steadily improved but the really impressive element of the campaign for me is the transparency of development(iii), and the ethics of its staff(iv)
also the software is opensource : https://github.com/PeachyPrinter
.
(i) http://www.peachyprinter.com/#!printer-specs/c1gk6
(ii) http://formlabs.com/products/form-1-plus/
(iii) https://www.youtube.com/user/PeachyPrinter
(iv) http://www.peachyprinter.com/#!ethics/c2208
[+] [-] unknown|11 years ago|reply
[deleted]
[+] [-] derekp7|11 years ago|reply
[+] [-] fit2rule|11 years ago|reply
[+] [-] ChuckMcM|11 years ago|reply
But it is also really unfair to second guess someone who is riding a bucking bull in a nursery. That is what running a very successful startup can be like, lots of money coming in, decisions needing to be made with too little information, large outcome swings based on them with precious little runway to correct for errors. When you are in that space and someone reaches in and offers to lift you out, it can be hard to be rational about the choices you are making. It seemed to me that Stratasys knew exactly what they where doing, and less so for Bre and crew.
Unfortunately for Stratasys they failed to understand why Makerbot had been growing like it had, probably taking the late product launch as all the rationale they needed for a cash short company. I believe that had they understood what they had stepped in to, they would have approached it very differently and made very different choices. Not the least of which would be a mixed model of open and proprietary gizmos for their printers.
I am convinced that their lack of openness lead directly to the C.F. that is their "SmartStruder" which now has people calling for class action lawsuits.
A company with the Goodwill of a Printrbot and the resources of a Stratasys would have dominated the 3D market completely. Instead small printer companies are flourishing and kickstarters for new printers regularly cross $1M in pledges (and that is for printers no one has any right to believe can even be built!)
I found it hugely ironic that Bre is on the cover of this month's Popular Science [1]
[1] http://www.popsci.com/2015-invention-awards
[+] [-] makomk|11 years ago|reply
For example, I believe MakerBot changed their extruder design for one that was suspciously similar to something one of the Chinese manufacturers came up with. Then their parent company Stratasys sued that company to stop them selling their printers, claiming the extruder infringed a patent of theirs via some, errm, creative interpretation of the patent claims. Buying MakerBot printers doesn't even help fund the companies that do the original R&D - it helps fund someone that's trying to sue them out of business.
Their printers are not cheap, not reliable and not even all that original, so why would you buy them?
[+] [-] fixxer|11 years ago|reply
[+] [-] FreakyT|11 years ago|reply
What is the story of this? (I tried searching for "SmartStruder class action" and all I found was this particular comment.)
[+] [-] bane|11 years ago|reply
The lack of real use-case is what's killing consumer-level 3d printers. Most people just don't need to run off a couple copies of a 3d trinket or toy with enough frequency to make it worth it. And the subset of those people with useful 3d-modeling skills is some tiny fraction of that number.
Whenever I see somebody using a 3d printer at the consumer level for something useful, it always seems to have just been for a one-off Arduino case or something like that. That's really just not incentive for me to spend the time and money to get setup with 3d printing, when I can just buy a case off of Amazon or whatever and be done with it.
The cost of the parts is the cost of your time + materials + setup costs (the printer). Is an Arduino case really worth $1400-$6500? That price only comes down if I print off more stuff I suppose, but at what point do the trinkets and dodads I'm printing off start to make economic and time sense? That's pretty far down the production chain, and I simply don't have that much stuff to print.
[+] [-] vonnieda|11 years ago|reply
I am the founder of OpenPnP, an Open Source SMT pick and place platform. I eschewed 3D printing for my design work for several years thinking that it was not accurate enough, not strong enough, etc. Having experience with CNC mills I kept comparing 3D printed parts to ones cut accurately from aluminum and found them lacking.
What I recently came to realize is that the power of 3D printing is in it's instant turnaround and the ability to quickly iterate. Now, I design my parts for 3D printing. They look and function differently than they would if I had cut them from aluminum and I have to take the limitations of 3D printing into account, but they work. And most importantly, I can test a new design simply by hitting "Print" and waiting an hour or two.
I agree that much of the consumer market is dominated by people who buy a 3D printer and then use it to print trinkets until they get bored, but there are also a lot of people out there who are engineering new devices and machines using the ability to quickly test new designs on a 3D printer.
[+] [-] auxym|11 years ago|reply
Also, your post reminds of a recent blog post by a friend of mind who is cofounder of a makerspace in the college town we were in. Loosely translated, he deplored how the maker culture has shifted from a utopia where everyone could learn to make their own durable and useful objects instead of buying into mass-production, planned obsolescence and consumerism, to a bunch of people manufacturing mostly useless plastic trinkets.
All in all though, when I move into a home with a garage, I'd love to get of those chinese mini-lathes which can be had for sub-1000$ :) And I wish laser cutters were less expensive (the trotec we had was bought around 40k I think, actually more than our CNCs).
[+] [-] bborud|11 years ago|reply
I'm not really disagreeing with you: right now it doesn't feel like 3D printers are a typical consumer item.
But experience tells me that this intuition is probably wrong.
As for "who needs it right now" I usually ask people if they own a plunge saw. Most people don't, but a lot of people do. In particular carpenters and DIY'ers. 3D printers are still unfamiliar territory for most people, but that'll change rapidly as they become better and cheaper.
In the future, as they become cheaper and better I don't see it as impossible that manufacturers of physical goods might use 3D printing to distribute spare parts and accessories for whatever they sell.
[+] [-] justifier|11 years ago|reply
(i) an arm on my glasses broke, i went to the shop i bought the glasses from, for 400$, and their suggestion? buy a new pair and my prescription has expired since the last time so i will need to have an eye exam for another 200$
(ii) the little plastic latch on my girlfriend's bike helmet broke in half, it still latches but can pop free with enough pressure
(iii) the clip on my compass broke so now i just tape a pencil onto it
(iv) variably sized plant pots
(v) mechanism holding the wheel on our closet door broke
(vi) clip on accessories: front and rear lights, phone nav; for bike
it's little annoyances that crop up and cause me to think i wish i could just print this little solution out
also..
(vii) i think parents would love the long term savings :: http://www.penny-arcade.com/news/post/2014/12/29/arts-and-cr...
(!) tinkering
.. 'all this and more' for 100$ .. http://www.peachyprinter.com/#!blog/c16fp
i think we need the printers in homes before we start to think about what we can print with them
the biggest problem i see is print time and recyclability of old parts
it is funny thought though.. i hate personal printers, all this useless paper lying about: "print me a reciept", "print me a boarding pass", "print me a copy of the report"
[+] [-] jacknews|11 years ago|reply
That's not the real problem. I guess it was a combination of chinese knockoffs and stratasys proprietary instincts.
In any case, IMHO, the layoffs are a result of losing the open community, which is now being serviced by true open-source proponents like Aleph with their excellent Lulzbot printers.
[+] [-] hugs|11 years ago|reply
[+] [-] orionblastar|11 years ago|reply
People forget when Osborne was losing sales, the IBM PC and PC-DOS was gaining sales and CP/M systems like those made by Osborne had a lot of competition. Microsoft/IBM had a converter program that could convert CP/M-80 programs to DOS programs. http://blogs.msdn.com/b/oldnewthing/archive/2015/04/17/10608...
Also Kaypro had won over Osborne customers with their own CP/M machines that reached the market before the new Osborne models.
Commodore had the VIC-20 and later Commodore-64 that provided cheaper computers as did the 8 bit Atari line. Some people would rather buy a $399 Commodore or Atari computer and hook it up to their TV screen.
So announcing a new product too far ahead of time was only one factor in the Osborne effect.
Makerbot has Chinese competition, and they had technical issues as well. There are more factors here than just announcing a new product too far ahead of time. Instead of Osborne it is more like the Apple III http://en.wikipedia.org/wiki/Apple_III
[+] [-] argonaut|11 years ago|reply
[+] [-] msabalau|11 years ago|reply
[+] [-] gaius|11 years ago|reply
[+] [-] monochromatic|11 years ago|reply
[+] [-] blhack|11 years ago|reply
[+] [-] devopsproject|11 years ago|reply
[+] [-] tarr11|11 years ago|reply
If I could have replaced the extruder with an open source clone that functioned better, I would have.
[+] [-] alayne|11 years ago|reply
[+] [-] ChristianGeek|11 years ago|reply
[+] [-] jjwiseman|11 years ago|reply
3D Robotics just raised $50M in a series C. It will be interesting to see how their commitment to openness holds up.
[+] [-] erkkie|11 years ago|reply
[+] [-] steve19|11 years ago|reply
[+] [-] jkestner|11 years ago|reply
If 3DR drones are more expensive, it's not only because they're not made in China. Manufacturing in Mexico is cheap enough, and buys you lead time, which suits their extremely fast iteration. A good idea in this gold rush.
People will pay more for the brand, if it stands for great support and integration. China is traditionally poor at those. 3DR started with a community, and regular people diving into drones will appreciate this comfort level.
TL;DR: To fight cheaper, make it better.
[+] [-] xenadu02|11 years ago|reply
[+] [-] spiritplumber|11 years ago|reply
[+] [-] fsk|11 years ago|reply
[+] [-] mrfusion|11 years ago|reply
[+] [-] pmorici|11 years ago|reply
[+] [-] anonbanker|11 years ago|reply
[+] [-] dsjoerg|11 years ago|reply
i have no stake in it myself, but if you're gonna make a strong statement like "doomed" you should back it up. layoffs != doomed
[+] [-] hugs|11 years ago|reply
Link: http://makezine.com/2015/04/17/makerbot-lays-off-100-employe...
But you have a point, they're not dead yet. They might turn the corner, hire again, and regain that $100 million in value someday.
[+] [-] deleterious|11 years ago|reply
[+] [-] sleepychu|11 years ago|reply
[+] [-] gonzo|11 years ago|reply
[+] [-] bigiain|11 years ago|reply
I learnt _huge_ amount pretty much accidentally from that machine and the user manual that came with it. Nobody told me at 12 or 14 years old that kids weren't supposed to solder together a handful of parts to add a joystick to the parallel port and write Z80 assembler routines to speed up the inner loops of games written in basic.
[+] [-] bjelkeman-again|11 years ago|reply
[+] [-] empressplay|11 years ago|reply
[+] [-] ericflo|11 years ago|reply
[+] [-] unknown|11 years ago|reply
[deleted]
[+] [-] iammaxus|11 years ago|reply